How to Assemble
Welcome > Mudprotection > How to Assemble

How to Assemble

 

1 Remove the wheel.

2 On the frontside add the provided clamp on the bumper support bolt

3 Remove rubber

4 Check if it fits

5 Copy the holes from the assembled clamp

6 Do the same on the backside. Use the standart clamp. Check the space without rubber. Space must be 8 mm.

7 Re-assemble the mudprotector with the rubber 

8 On the right place

9 Lock the bolts

10 Don't forget to remove the plastic foil; you can of course paint the protectors, if you like.